!#8# Long HDMI Cables - Do They Work? | !8: Lowest Price 50 Ft Hdmi Cables

!±8± Long HDMI Cables - Do They Work?

As if that were not enough with all the HDMI "stuff" that the potential buyer to look over a long HDMI cable. In the days of analog video, never the reliability of signal transmission cables long been a problem, but in the early days of HDMI and DVI, we heard the voices of consumers with relatively short run problems, but things have, over time , but the actual length, you can improve the long HDMI cable is not always the driving of a hot potato industry.

We try toCheck out the latest HDMI specification for an answer to the question. Each cable must be tested by the HDMI Authorized Test Center before they are able to obtain certification of compliance. These certificates can be used as a sort of unofficial guide for the length of the cable handy. There are a number of cables that are compatible with lengths over 10 meters and there are some who have passed the exam, are up to 13.0 meters, not shown to deteriorate the signal to a set pointaccreditation bodies. A good tip is to buy certified cable with the latest specification, is at this stage HDMI 1.3b, 1.3 and 1.3a, are also acceptable, but how to pass the test reports of these cables to have to get more restrictive as the standard pre-specific, such as 1.1 or 1.2.

Before you are tempted to buy something more than 13.0 meters (45 feet), are available and marketed as being compatible, then it may be useful to ask to see a copy of, becausethis time the length of 13.0 meters (45 feet) is the longest of any increase in cable (enhanced), I saw that with the proper certification.

That said, there are HDMI cables, which are classified as active, use the power amplifier to amplify the signal allows longer cables are used. An EQ unit is also active on this cable also provides lost data at high frequency and then compare these uses. These systems work, but no reliable informationactual effective length of the additional costs and the additional possibility of failure of delivery of the signal due to the inclusion of additional components may be a step too far for your home entertainment system and is best left to commercial applications.

But all is not lost, if you need to run cable lengths. Just remember, the HDMI specification is so you can be sure that when you generate the signal system compatible (source) can be connected to a compatible device, inthen in turn can be connected to another using the cables are compatible and if you turn everything will work. As with all specifications, there will be some flexibility built in - the drawing - and the input signal is delivered, the HD-enabled equipment is better than it is for these devices to work, seen as necessary. This gives you a range of options, the options that do not fit into are not guaranteed to work like the previous example, but the options that have provenWork and not the additional cost of gain.

There are ports available, while not in accordance with a job to do and, of course, there are long (for compliance) of the cable. If you go this route, it is important to remember that the higher the bit rate of your HD-enabled devices, the less chance of success attracts. We must also remember that this is also for long chains, HDTV, Blu-ray home theater or connected to the Internet Video Streamingrequest to 1080p is to push for longer-range, which has a length commensurate with their limitations. But for 480p, 720p or 1080i, can work well. You can see how this can be lucky.

Now, in light of future developments, that if you put these lines in the walls, etc., as if you were to decide on the limits of this stop you upgrade the cable could take. Take where we are today. 1080p is the new solution for HDTV. Not long ago, 480p was the norm,Then came 720p and 1080i, which uses a bit rate almost three times higher than the 480p standard. Then it was 1080p, the bit rate is doubled the consumption of 1080i and 720p. Now we are on the edge of the media 3D TV, color depth 16-bit and 1460p (and higher), 16-bit color only double the bit rate required for the current standard resolution, so you can see where it could go. Another important aspect in deciding whether or not long. It 'a fact that the cables run out of 2-3 meters(6-10 feet) in length, the issues of lesser quality. A cable leads cost a few dollars and tens of U.S. dollars, but when you enter the kingdom is not of quality match is worth much more. In general, the lower the quality of the cable is less then the actual distance of work is increased if the image resolution or color depth.

So, to reveal what was said about long HDMI cables and their reliability. For lengths, the HDMI-compatible,the length of over 13 meters (45 feet), their use is more or less guaranteed, even if they are less expensive options for 480p, 720p, 1080i and - though not always reliable - 1080p so go ahead and use them contrast with confidence. The same goes for the shorter cable from 1-3 meters (30-10 feet) in length, although caution should be exercised when using them in long signal chains, as might be unreliable. Cheaper ways of longer HDMI cable work on the limits of itperformance capabilities may struggle in the 1460p, 16 bit color future and their use needs to be questioned if their installation is behind ceilings or walls as the additional cost of a more expensive cable may be less than a complete re-install in the (not to distant) future. The use of over compliant length HDMI cables needs to be linked to all the factors mentioned above but with the rider that the best method of testing if it will be successful still lies with plugging it in. Even at these lengths, the cheaper options are still worth considering if the installation of long HDMI cables is easily accessed and they work OK with your present equipment.